Join us at SMM Exhibition 2024 in Hamburg from 3th to 6st of september

Hawke Sealing Solutions

For cabinet seals

Hawke Cabinet Sealing Systems give IP protection to cable entries within an electrical cabinet/enclosure, avoiding water and dust to penetrate it thus protecting the equipment inside. Its modular design allows modifications to be done exactly as in standard installations.

Using a H-DM and H-HC is an easier and quicker alternative to using conventional gland plates

H-HC

FEATURES:

Made of mild steel or stainless steel.
To be installed (bolted) inside or outside the panels and cabinets.
To be sealed with plugs and standard HAWKE compression system, stayplates and lubricant.
No additional tools required for installation.
Different sizes.

*Guaranteed IP66 and IP67 rating*

H-HC Frame

The H-HC frame is manufactured with a 5 cm flange. This flange can be placed centrally in the frame or offset on one side. Available in two sizes, 60 and 120 mm wide (internal).

Made of mild steel or stainless steel.
To be installed (bolted) inside or outside the panels and cabinets.
To be sealed with plugs and standard HAWKE compression system, stayplates and lubricant.
No additional tools required for installation.
Different sizes.

Compression System 60mm

The Hawke cable blocks have a tolarance that is achieved by having 5 points of contact with the cable that guarantees the sealing of the cable even if it is deformed.

Thanks to this tolerance, each Hawke block covers a range of diameters between 3 and 4 mm. It is not necessary to manipulate the block, as this tolerance is achieved by deforming it when the system is compressed.

Blank Filler blocks

Blocks designed to seal the cable clearances in the frame. This allows for the installation of new cables in the future within the same frame.

Tolerant Blocks

Standard blocks for sealing cables between 15 mm and 60 mm. The blocks are colour-coded to facilitate inspection and avoid installation mistakes.

No modification is required during installation. Zero waste materials.
Four adjustment points (sealing slots) inside the inner faces of the plug ensure proper contact along the cable/piping.
The maximum and minimum sealing range is marked on the plugs. In addition, the color code allows for proper visual inspection.

Standard Stayplate 60mm

Stayplates ensure the blocks in a Hawke rectangular system (tolerant and blank ones) are fixed in position after compression.

H-DM

FEATURES:

Made of aluminium.
To be installed (bolted) inside or outside the panels and cabinets.
To be equipped with Hawke plugs of the DM series, stayplates and lubricant (ref 967).
To be sealed with Hawke compression system (CSDM – 120/S compression kit).
No additional tools required for installation.
3 different sizes.

*Guaranteed IP66 and IP67 rating*

H-DM Frame

Hawke H-DM is a low weight cable sealing solution, frames are made in aluminum to be installed (bolted) inside or outside the panelboards and electrical cabinets, designed for the sealing against external conditions.

Three different sizes.

Compression system (CSDM 120/S compression kit)

Hawke CSDM Compression system is used in H-DM frames to compress and seal the installation of cables and DM modules. It includes the endpacker unit, 5mm filler strip and two stayplates. The 5mm filler strip can be installed as either the top or bottom row of blocks within a H-DM aperture.

The extra 5mm strip is recommended to be placed on the bottom row of the frame, along with one of the stayplates.

Filler blocks

Blocks made of the same material as the standard blocks and designed to seal the free spaces of cables of the frame. This allows the installation of new cables in the future within the same framework.

Tolerant Blocks

Standard tolerant blocks for cable sealing between 15 mm and 60 mm. The H-DM system blocks have color coding to facilitate inspection and avoid installation mistakes.

Standard Stayplate

Stayplates ensure the blocks in a Hawke rectangular system (tolerant and blank ones) are fixed in position after compression.