Join us at SMM Exhibition 2024 in Hamburg from 3th to 6st of september
Join us at SMM Exhibition 2024 in Hamburg from 3th to 6st of september
The Hawke cable blocks have a tolarance that is achieved by having 5 points of contact with the cable that guarantees the sealing of the cable even if it is deformed.Thanks to this tolerance, each Hawke block covers a range of diameters between 3 and 4 mm. It is not necessary to manipulate the block, as this tolerance is achieved by deforming it when the system is compressed.
Hawke HF EMC tolerant blocks are designed to accommodate different cables passing through the frame. Its special design with five contact points allows the blocks to accommodate different diameters within the same block and accept variances in cable/pipe diameters. Silver-loaded paint and copper strip wrapping ensures correct shielding.
Filler blocks are available in the same materials as insert blocks. They are used to fill in the free spaces in the frame, allowing a reserve capacity for future needs.
The Hawke compression system has 2 elements: The End Packer and the Compression Plate.
Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decisions on the part of the installer.
The Unique Hawke Round Corner Compression System is used in HMCX rectangular frames to compress and seal the installation of cables/pipes and HF modules.
The Hawke compression system has 2 elements: The End Packer and the Compression Plate.
Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decisions on the part of the installer.
The Unique Hawke EMC Compression Systems are used in rectangular frames to compress and seal the installation of cables/pipes and HF EMC modules when electromagnetic compatibility is needed.
Hawke CSDM Compression system is used in H-DM frames to compress and seal the installation of cables and DM modules. It includes the endpacker unit, 5mm filler strip and two stayplates. The 5mm filler strip can be installed as either the top or bottom row of blocks within a H-DM aperture.
The extra 5mm strip is recommended to be placed on the bottom row of the frame, along with one of the stayplates.
The Hawke compression system has 2 elements: The End Packer and the Compression Plate.
Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decisions on the part of the installer.
Backing plates are designed to be installed on the opposite side of a frame, giving a wall or structure finished appearance.
What are you looking for?
Navegation
Contact
