Marine Frames/Sleeves

MCT’s – Marine

Hawke Transit System frames, both rectangular and circular, are designed for use in marine environments with maximum sealing guarantees.

Rectangular Frames

Hawke Transit Frames are available in mild steel, stainless steel and aluminium.

Certified for marine applications. For specialist applications frames can be manufactured to suit customers specific requirements.

They can be manufactured as open frames for applications where the cable is already installed.

All possible combinations of dimensions and openings are supplied.

HMX

Type HMX (For Marine Applications), thickness 10mm without Flange. These types of frames are to be welded to the bulk or deck following the installation instructions of Hawke Transit System´s catalogue.

HMFX

Has a 60mm wide flange and is available in the same materials and finishes as HMX frames. For overall dimensions of HMFX frames add 120mm (allowance for flange) to those given for standard HMX frames.

HMEX

A standard HMX frame extended using a welded collar. For use in corrugated bulkheads or to fit the frame above deck level. For overall dimensions of HMEX frames add 20mm to external measurements of Standard HMX frames.

HMBX

For sealing cable routes in uninsulated HO rated areas or similar applications. Add 20mm to external dimensions of standard HMX frames to determinate overall width and height.

HMRX TB

For stressed area applications, end fillet pieces with radius corners are added to the HMX frame.

HMCX

Marine Frames With Round R30 Corners. Very useful for narrow areas in bulkheads and decks.
Our HMCX has multidimensional openings.

HMOX

Rectangular frame for marine applications with removable end which allows to be installed around existing cables and pipes. Made from 10mm thickness steel.

HMFBX

Rectangular frame with flange for marine applications. Made from 10mm thickness steel with a 60mm flange.

Sleeves

Hawke’s round frames or sleeves are designed to be installed inside Hawke’s round transit systems.

Hawke´s Sleeves effectively seal cables and pipes passing through circular apertures, and pressure seal against fire, water and gas, etc. The seal is formed by tightening the compression bolts which expand the system radially, this causes pressure to be exerted against the aperture wall and closes down the tolerant blocks.

C Sleeve

Sleeve without flange for Hawke Round transits. Designed for installation in HRT/HRTO and standard HRST or EMC.