Join us at SMM Exhibition 2024 in Hamburg from 3th to 6st of september
Join us at SMM Exhibition 2024 in Hamburg from 3th to 6st of september
Rectangular frame for marine applications with removable end which allows to be installed around existing cables and pipes. Made from 10mm thickness steel.
Has a 60mm wide flange and is available in the same materials and finishes as HMX frames. For overall dimensions of HMFX frames add 120mm (allowance for flange) to those given for standard HMX frames.
Marine Frames With Round R30 Corners. Very useful for narrow areas in bulkheads and decks.
Our HMCX has multidimensional openings.
For sealing cable routes in uninsulated HO rated areas or similar applications. Add 20mm to external dimensions of standard HMX frames to determinate overall width and height.
A standard HMX frame extended using a welded collar. For use in corrugated bulkheads or to fit the frame above deck level. For overall dimensions of HMEX frames add 20mm to external measurements of Standard HMX frames.
All standard HTS marine and civil frames are able to be used in EMC systems.
Stainless Steel is highly recommended for EMC applications.
Standard Civil Flanged frame to be bolted or casted to a wall or floor.
Frame with removable end which allows the frame to be installed around existing cables and pipes.
Rectangular frame with flange for marine applications. Made from 10mm thickness steel with a 60mm flange.
Rectangular frame with flange for EMC applications. Made from 10mm thickness steel with a 60mm flange.
Hawke C marine sleeve without flange for Hawke Round transits.
Designed to be welded. Manufactured in different materials: Mild Steel, Stainless Steel and Aluminium. To be sealed with standard or EMC HRT/HRTO and HRST.
Stainless steel circular marine and civil frames for EMC transits.
Designed to be welded. To be sealed with EMC HRT/HRTO and HRST.
Sleeve with flange and removable end which allows installation around existing cables.
Sleeve with flange for Hawke Round Transits.
Sleeve with flange for Hawke Round Transits.
Hawke HRTO Certified for both Civil and Marine applications.The HRTO has been designed to be sealed using standard Hawke tolerant blocks, Hawke HRTO provide effectively sealing of cables and pipes through a circular aperture.
Hawke HRTO is supplied as an OPEN frame, so that it can be installed after laying the cables or pipes.
HRST 40 2D15
Hawke HRST multihole designed for the sealing of up to 2 cables with an external diameter between 10 and 15 mm. Empty cable space to be filled with Plug HRST 2D15.
HRST 40 4D12
Hawke HRST multihole designed for the sealing of up to 4 cables with an external diameter between 8 and 12 mm. Empty cable space to be filled with Plug HRST 4D12.
The Hawke cable blocks have a tolarance that is achieved by having 5 points of contact with the cable that guarantees the sealing of the cable even if it is deformed.Thanks to this tolerance, each Hawke block covers a range of diameters between 3 and 4 mm. It is not necessary to manipulate the block, as this tolerance is achieved by deforming it when the system is compressed.
Hawke HF EMC tolerant blocks are designed to accommodate different cables passing through the frame. Its special design with five contact points allows the blocks to accommodate different diameters within the same block and accept variances in cable/pipe diameters. Silver-loaded paint and copper strip wrapping ensures correct shielding.
Filler blocks are available in the same materials as insert blocks. They are used to fill in the free spaces in the frame, allowing a reserve capacity for future needs.
The Hawke compression system has 2 elements: The End Packer and the Compression Plate.
Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decisions on the part of the installer.
The Unique Hawke Round Corner Compression System is used in HMCX rectangular frames to compress and seal the installation of cables/pipes and HF modules.
The Unique Hawke EMC Compression Systems are used in rectangular frames to compress and seal the installation of cables/pipes and HF EMC modules when electromagnetic compatibility is needed.
The Hawke compression system has 2 elements: The End Packer and the Compression Plate.
Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decisions on the part of the installer.
Hawke CSDM Compression system is used in H-DM frames to compress and seal the installation of cables and DM modules. It includes the endpacker unit, 5mm filler strip and two stayplates. The 5mm filler strip can be installed as either the top or bottom row of blocks within a H-DM aperture.
The extra 5mm strip is recommended to be placed on the bottom row of the frame, along with one of the stayplates.
The Hawke compression system has 2 elements: The End Packer and the Compression Plate.
Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decisions on the part of the installer.
Backing plates are designed to be installed on the opposite side of a frame, giving a wall or structure finished appearance.
This re-usable compression tool is designed to apply compression to the system before placing the endpacker within the frame.
This makes the operation of installing the compression system much easier than a conventional bolt-type system.
This re-usable tool is designed to extract the compression system without damaging the frame and reducing dismantling time up to 50%. This also means that you can re-use the Hawke compression system.
This re-usable tool is designed to hold the frame in position during the welding process, avoiding deformations due to high temperature.
This re-usable tool is designed to hold the blocks or cables in position during an installation, especially useful in horizontal frames, partial installations or when the amount of cables makes the installation uneasy.
The lubricant remains soft and will not dry out with the passing of time,
It is used in EMC Systems to fill de gap between the cable screen and the EMC HF block after cable sheath has been removed.
Remove the cable sheath with precision and without damaging the cable screen.
Mastic should be applied between the flange of the frame and the structure to ensure a tight seal and avoid possible gaps.
It must be applied between the frame flange and the structure to ensure a tight seal and avoid possible gaps.
The mould can be round or rectangular.
The mould can be round or rectangular.
What are you looking for?
Navegation
Contact
