The Hawke cable blocks have a tolarance that is achieved by having 5 points of contact with the cable that guarantees the sealing of the cable even if it is deformed.Thanks to this tolerance, each Hawke block covers a range of diameters between 3 and 4 mm. It is not necessary to manipulate the block, as this tolerance is achieved by deforming it when the system is compressed.
Filler blocks are available in the same materials as the tolerant Blocks. They are used to fill spaces within the frame which are not required for services, thus allowing spare capacity for future requirements.
Hawke Trefoil Insert Blocks: These blocks allow three single phase power cables to be sealed inside of the same cable block. *Available in 90mm and 120 mm size*
Filler blocks are available in the same materials as the tolerant Blocks. They are used to fill spaces within the frame which are not required for services, thus allowing spare capacity for future requirements.
Hawke HF EMC tolerant blocks are designed to accommodate different cables passing through the frame. Its special design with five contact points allows the blocks to accommodate different diameters within the same block and accept variances in cable/pipe diameters. Silver-loaded paint and copper strip wrapping ensures correct shielding.
Filler blocks are available in the same materials as insert blocks. They are used to fill in the free spaces in the frame, allowing a reserve capacity for future needs.
Standard tolerant blocks for cable sealing between 15 mm and 60 mm. The H-DM system blocks have color coding to facilitate inspection and avoid installation mistakes.
Blocks made of the same material as the standard blocks and designed to seal the free spaces of cables of the frame. This allows the installation of new cables in the future within the same framework.
The Hawke compression system has 2 elements: The End Packer and the Compression Plate.
Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decisions on the part of the installer.
The Unique Hawke Round Corner Compression System is used in HMCX rectangular frames to compress and seal the installation of cables/pipes and HF modules.
The Hawke compression system has 2 elements: The End Packer and the Compression Plate.
Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decisions on the part of the installer.
The Unique Hawke EMC Compression Systems are used in rectangular frames to compress and seal the installation of cables/pipes and HF EMC modules when electromagnetic compatibility is needed.
Hawke CSDM Compression system is used in H-DM frames to compress and seal the installation of cables and DM modules. It includes the endpacker unit, 5mm filler strip and two stayplates. The 5mm filler strip can be installed as either the top or bottom row of blocks within a H-DM aperture.
The extra 5mm strip is recommended to be placed on the bottom row of the frame, along with one of the stayplates.
The Hawke compression system has 2 elements: The End Packer and the Compression Plate.
Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decisions on the part of the installer.
Hawke Backing Plate are used in conjunction with Hawke flanged frames to add finished appearance to an installation.
Backing plates are designed to be installed on the opposite side of a frame, giving a wall or structure finished appearance.
Gestionar consentimiento
Utilizamos cookies para optimizar nuestro sitio web y nuestro servicio.
Funcional
Always active
El almacenamiento o acceso técnico es estrictamente necesario para el propósito legítimo de permitir el uso de un servicio específico explícitamente solicitado por el abonado o usuario, o con el único propósito de llevar a cabo la transmisión de una comunicación a través de una red de comunicaciones electrónicas.
Preferencias
El almacenamiento o acceso técnico es necesario para la finalidad legítima de almacenar preferencias no solicitadas por el abonado o usuario.
Estadísticas
El almacenamiento o acceso técnico que es utilizado exclusivamente con fines estadísticos.El almacenamiento o acceso técnico que se utiliza exclusivamente con fines estadísticos anónimos. Sin un requerimiento, el cumplimiento voluntario por parte de tu proveedor de servicios de Internet, o los registros adicionales de un tercero, la información almacenada o recuperada sólo para este propósito no se puede utilizar para identificarte.
Marketing
El almacenamiento o acceso técnico es necesario para crear perfiles de usuario para enviar publicidad, o para rastrear al usuario en una web o en varias web con fines de marketing similares.
Your information will be processed securely in accordance with the Organic Law 3/2018 of December 5, Protection of Personal Data and guarantee of digital rights, we inform you that the personal data you provide through this form will be incorporated into a file of the entity HAWKE TRANSIT SYSTEM, S.L, with the purpose of answering your questions and suggestions as well as keeping you informed by any means (including e-mail or equivalent electronic system) of all those activities, products and services of our entity that we believe may be of interest to you unless you check the box provided for that purpose. You have the right to access, rectify, cancel and oppose in the terms provided for in the Law, which you may exercise in writing addressed to HAWKE TRANSIT SYSTEM, S.L., responsible for the file, with address at POLÍGONO TANOS – VIÉRNOLES C/ La Espina, 44 – 39300 TORRELAVEGA – CANTABRIA”