Cabinet Seals
H-HC
HAWKE H-HC is a cable sealing solution exclusive to HAWKE Transit System, designed to seal electrical panels and cabinets against external conditions.
Following the same design as the standard HAWKE sealing system, the H-HC system is designed for junction boxes and electrical cabinets with reduced dimensions.

Frames
The H-HC frame is manufactured with a 5 cm flange. This flange can be placed centrally in the frame or offset on one side. Available in two sizes, 60 and 120 mm wide (internal).
- Made of mild steel or stainless steel.
- To be installed (bolted) inside or outside the panels and cabinets.
- To be sealed with plugs and standard HAWKE compression system, stayplates and lubricant.
- No additional tools required for installation.
- Different sizes.
Blocks
Standard blocks for sealing cables between 15 mm and 60 mm. The blocks are colour-coded to facilitate inspection and avoid installation mistakes.
- No modification is required during installation. Zero waste materials.
- Four adjustment points (sealing slots) inside the inner faces of the plug ensure proper contact along the cable/piping.
- The maximum and minimum sealing range is marked on the plugs. In addition, the color code allows for proper visual inspection.